当前位置:首页 > 产品中心 > 光纤放大器

描述

E3X-NA11光纤放大器

主要特点
●用8回转调整旋钮可进行微调整的通用型。
●是传统产品检测距离的2倍。
●带有应差可变旋钮
●使用脉冲亮灯进行20y S的超高速应答。
●以绿色光源可检测微妙的色差。
E3X-NA11光纤放大器Fiber optic amplifier

一、主要特点 Main Features

●用8回转调整旋钮可进行微调整的通用型。
●是传统产品检测距离的2倍。
●带有应差可变旋钮
●使用脉冲亮灯进行20ψS的超高速应答。
●以绿色光源可检测微妙的色差。
●Universal type with 8-shaped rotated adjusting knob to do micro-adjustment.
●Double detection distance of traditional product
●With a variable knob
●With pulsing light to respond within an ultra-short time of 20
●Can detect delicate aberration with green light source
型号GJ-FNPNNA11NA21NA11FNA11VNAG11NA6NAG6NA14V
PNPNA41NA51NA41FNA41VNAG41NA8NAG8NA44V
光源(****光波长)
light source (ight-emitting wavelength)
红色****光二极管 Red light-emitting diode(660nm)
光源(****光波长)DC10-30V[含脉动(P-P)10%]DC10-30V[with the pulse(p-p)10%]
light source (ight-emitting wavelength)35mA以下 The following 35mA
控制输出 Output Control负荷电源电压DC35以下,负荷电流100mA以下(留电压1V以下)集电极开路输出形(NPN/PNP的输出因形式不同而异)入光时ON/遮光时ON开关转换式
Main voltage of load is below DC35v,load current is below 100mA(residual voltage below 1v),OPEN-collector output type(NPN or PNP output varies in different state),on when
应答时间 Response time动作·复位、各200ψS以下 Reset action,the following 200ψS
灵敏度调整 Sensitivity adjustment8旋转无终端旋钮(带有指示器) 8 rotary knob without end (with indicator)
保护电路 Protection circuit金属安装配件,调整用螺丝刀,操作说明 The installation of metal accessories used
to adjust screwdriver,operation manuals
照明 Lighting保护电源逆接线,保护输出短路,防止相互干扰功能
Protection against the power connection,output short circuit protection to prevent interference function
周围温度 Ambient temperature受光面的光照度,白炽灯;3000rx以下,太阳光10000rx以下
Smooth by the light,incandescent 3000rx below,following the sun 10000rx
周围湿度 Surrounding humidity动作时;-25~55℃,保存时;40~70℃(不能有给冰,结露现象)
When action:-25~+55℃,save time; 40~70℃(there can not be frozen,the phenomenon of condensation)
绝缘电阻 Insulation resistance20mΩ以下(DC500MV以兆计)20mΩ above(DC500MV to trillion dollars)
耐电压 Voltage resistanceAC1,000V 50/60Hz  1min
振动(耐久)Vibration(durable)10-55Hz 复振幅1.5mmX、Y、Z各方向2h  10-55Hz complex amplitude 1.5mm X,Y,Z direction of the 2h
冲击(耐久)Shock(durable)500m/s 2X,Y,Z 各方向3次500/s2 X,Y,Z, Zdirection of the 3rd
保护构造 Protection structureIBC规格IP50(安装保护盖时)IBC Standard IP50(when the installation of protective cover)
连接方式 Connection导线引出开型(标准线长2m)Open-wire lead(standard long line 2m)
质量(以包装情况下)Weight(in cases)100g
材料Materials外壳 Shell耐热 ABS Heat-resistant ABS
保护罩 The
protective shield
聚脂 Polyester
附属品 Accessories金属安装配件,调整用螺丝刀,操作说明 The installation of metal accessories used
to adjust screwdriver,operation manuals


< img src="https://sdk.51.la/icon/1-1.png">
网站地图